ELNA 7200 Service Manual page 8

CS RING
AUTO THREAD CUTTER BUTTON
UP/DOWN NEEDLE POSITION
BUTTON
LOCK STITCH BUTTON
REVERSE STITCH BUTTON
START/STOP BUTTON
TO REPLACE CIRCUIT BOARD F
CIRCUIT BOARD F
SETSCREW (A)
[TO REMOVE THE CIRCUIT BOARD F]
1. REMOVE THE FRONT COVER (REFER TO PAGE 4)
2. PULL OUT THE CONNECTOR FROM THE CIRCUIT
BOARD A.
3. REMOVE THE 3 SETSCREWS (A), 2 CS RINGS AND
CIRCUIT BOARD F.
[TO ATTACH]
REVERSE THE ABOVE PROCEDURE.
MAKE SURE THAT THE BUTTONS ARE PLACED IN
THE CORRECT PLACES AND DIRECTION (FIG. 1).
(FIG. 1)
7
7200