To Remove Face Plate And Top Cover - ELNA 7200 Service Manual

TO REMOVE FACE PLATE AND TOP COVER

SETSCREW (B)
PRESSURE DIAL
FACE PLATE
SETSCREW (A)
TOP COVER
FACE PLATE
<TO REMOVE>
REMOVE THE SETSCREW (A) TO REMOVE THE
FACE PLATE.
<TO ATTACH>
ATTACH THE FACE PLATE WITH THE SETSCREW (A).
TOP COVER
<TO REMOVE>
1. REMOVE THE SETSCREWS (B) AND (C).
2. PULL OUT THE CONNECTOR (D) OF THE
BOBBIN WINDER AND REMOVE THE TOP COVER.
<TO ATTACH>
1. CONNECT THE CONNECTOR (D) AS SHOWN
ABOVE. THEN ATTACH THE TOP COVER. TIGHTEN
THE SETSCREWS (B) AND (C).
1
SETSCREW (C)
CONNECTOR (D)
CONNECTOR CASE
7200