ELNA 7200 Service Manual page 5

7200
SETSCREW (A)
SETSCREW (B)
FRONT
COVER
[VIEW FROM BELT COVER SIDE]
SETSCREW (C)
[VIEW FROM FACE PLATE SIDE]
CORDS
TO REMOVE FRONT COVER
SETSCREW (D)
INSULATION PAPER
[TO REMOVE]
1 REMOVE THE FACE PLATE, TOP COVER AND BELT
COVER (REFER TO PAGES 1 AND 2).
2 LOOSEN THE SETSCREWS (A), (B), (C) AND (D).
3 PULL OUT THE CONNECTORS (REFER TO
PAGE 22) AND REMOVE THE FRONT COVER.
[TO ATTACH]
4 PROCEED WITH THE ABOVE PROCEDURE IN
REVERSE.
WHEN ATTACHING THE FRONT COVER, ENSURE THAT
THE CORDS SHOWN IN THE PHOTO ON THE LEFT DO
NOT GET CAUGHT BETWEEN THE COVER AND THE
PARTS.
4