Operating Mode 'Slave; Operating Mode 'Sound - thomann Fun generation User Manual

Operating

6.2 Operating mode 'Slave'

6.3 Operating mode 'Sound'

36
This setting is only relevant if the device is serving as Slave in a Master / Slave configuration
and is not controlled via DMX.
1. Press [Mode] repeatedly until the display shows 'SLAv' .
ð The device is in Slave mode.
2.
Use [Mode] to select any other operating mode to exit Slave mode.
This setting is only relevant if the device is not controlled via DMX. In this operating mode, the
device responds to acoustic pulses which are recorded by the integrated microphone.
1.
Press [Mode] repeatedly until the display shows 'Soud' .
ð The device is in Sound mode.
2.
Use [Mode] to select any other operating mode to exit Sound mode.
LED effect