Operating
6.1 Operating Modes 'Preprogrammed Automatic Show' and 'Manual'
30
A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
1.
Press [Mode] repeatedly until the display shows 'AUTO' .
ð Playback of preprogrammed shows 'Pr.02' and 'Pr.03' starts automatically.
2.
Press [Setup] repeatedly until the display shows 'n.00x' and adjust the programme speed
with [Up] and [Down] in a range from 'n.001' ... 'n.100' (slow ... fast).
3.
Press [Setup] repeatedly until the display shows 'SP.xx' and adjust the programme speed
with [Up] and [Down] in a range from 'SP.01' ... 'SP.FL' (slow ... fast).
4.
Press [Setup] repeatedly until the display shows 'F5.xx' and adjust the frequency of the
strobe effect with [Up] and [Down] in a range from 'F5.00' ... 'F5.99' (slow ... fast).
LED effect
Need help?
Do you have a question about the Fun generation and is the answer not in the manual?