Gigabyte GA-6PXSVT User Manual page 35

32) S3_MASK (S3 Power On Select Jumper)
33/34) SATA_DOM0/SATA_DOM1 (SATA port 0 and port 1 DOM Jumpers)
CAUTION!
• If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2.
• If the SATA DOM power is supplied by external power, set the jumper to pin 2-3.
• If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed
and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage.
Please refer to the pin definition table in the following.
SATA_DOM0
SATA_DOM1
Hardware Installation
1-2 Close: Stop an initial power on when BMC is not
ready.
1
2-3 Close: Keep initial power on. (Default setting)
1
For SATA_DOM0
Pin No. Definition
1
1
2
3
For SATA_DOM1
Pin No. Definition
1
1
2
3
- 35 -
P5V
SATA_DOM_0
GND
P5V
SATA_DOM_1
GND