Safety Instructions - Jon-Don PE500 Safety, Operation And Maintenance Manual With Parts List

1.0 Safety Instructions

READ THIS MANUAL BEFORE OPERATING MACHINERY. KNOW THE
PROPER SETUP, OPERATION, CORRECT APPLICATIONS AND THE
LIMITATIONS OF THIS EQUIPMENT BEFORE USE.
This carpet extractor will afford you many years of trouble-free operating satisfaction,
provided it is given the proper care. All parts have passed rigid quality control standards
throughout the assembly process. Prior to packaging, your carpet extractor was again
inspected for assurance of flawless operation.
This machine is protectively packed to prevent damage in shipment. We recommend that
upon delivery, unpack the unit and inspect it for any possible damage. Only a visual
inspection will reveal damage that may have occurred.
If damage is discovered, immediately notify the transportation company that delivered
your equipment. As a shipper, we are unable to report any claim for damage. You must
originate any claim within five (5) days.
This manual is for your protection and information. Please read carefully since failure to
follow precautions could result in discomfort or injury.
Reduce the Risk of Fire, Electric Shock or Injury
Use only as described in this safety operating manual. Use only the manufacturer's
recommended attachments, accessories, replacement parts and filters. Replace damaged
or worn parts immediately with genuine, original equipment parts to maintain safety and
to protect your limited warranty.
Always turn OFF the carpet extractor before connecting, disconnecting or working on
the machine. This equipment must be connected to a properly grounded outlet only (see
grounding instructions). Two (2) 25-foot, 12/3-gauge safety power cords are provided
with this unit (dependent on the model) and MUST be used with this unit to ensure
grounding protection. Turn off all controls before unplugging. Make sure the on/off
switch is in the off position. This is not a toy. Close attention is necessary when used
around or near children. Use extra care when cleaning on stairs.
(4) PE500 12-Gallon, 500 PSI Carpet Extractor
12.0 Machine Parts List – Heated Unit Continued
Drawing No. Item ID
51 10-0814
52 10-1500-C
53 80-0022-A
54 10-0921
55 10-0204
56 80-0022-A
57 10-0920
58 80-0101-M
59 10-0801-I
60 80-0011-2
61 10-0907
62 10-0901
63 80-0010
64 10-0868
65 10-0843
66 10-0835-B
67 80-0016-JONDON
68 10-0843
69 10-0801-J
70 10-0846
71 10-0356
72 80-0017
73 80-0017
74 10-0843
75 10-0400-C
76 10-0818
77 10-0832
78 10-0831
Item Description
Sensor for Extractor Heater
Heater Element 875 Watt
Screw for Panel
Aluminum Box for Dual Rod Heater
Motor Mount Backup Washer
Screw for Panel
Dual Rod Heat Exchanger Tube
1/4" Male Check Valve
90 FPT for Exchanger Tube
90 Degree Street Elbow
Strain Relief for Tube Heater
175 PSI Relief Valve for Heater
1/4" Brass Tee
1/4" Female QD for Extractor
3/8" Black Hose for Extractor
Pump Bolt 100 PSI Extractor
500 PSI Extractor Pump
3/8" Black Hose for Extractor
90 MPT for Extractor Heater
1/4" MPT Hex Nipple for Extractor
3/8 MPT x 3/8 Barb 90 Degree
Bulk Head Fitting for Extractor
Bulk Head Fitting for Extractor
3/8" Black Hose for Extractor
Keeper Latch for Extractor
S/R Top of Tank Bolt on Extractor
S/R Strap Bolts
S/R Bracket for Extractor
PE500 12-Gallon, 500 PSI Carpet Extractor (17)
Qty.
4.00
2.00
2.00
1.00
4.00
4.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
6.00
4.00
1.00
6.00
1.00
1.00
2.00
2.00
2.00
6.00
1.00
2.00
4.00
2.00