Calling Security Guard Stations; Monitoring - Aiphone GT-1C7-L Operation Manual

USING THE STATION
2

CALLING SECURITY GUARD STATIONS

1
In the standby mode, pressing the [ ] button will make the
status indicator flash and a call confirmation tone will sound.
GT-1C7-L/GT-1C7
Flashes.
Flashes.
3

MONITORING

1
In the standby mode, press the [
images of the entrances in sequence. Audio can be heard at the
same time. The status indicator will light up.
GT-1C7-L/GT-1C7
• Listening is possible with hearing aids with T-mode. (GT-1C7-L and
GT-1M3-L only)
GT-1M3-L/GT-1M3
Flashes.
] button to display the video
GT-1M3-L/GT-1M3
2
A tone will sound at the security guard station.
• The in use indicator (orange) at all of the connected entrance stations
and security guard stations will light up.
• If there is no answer, a call record will be stored in the security guard
station.
NOTES: • If there is an operation such as a call, monitoring ends and the
call operation begins.
• Monitoring will automatically end if monitoring is performed at
another residential/tenant station.
[ ]
• Press the
the entrance station being monitored.
• During monitoring, the wide view is displayed. (If the [ ]
button is pressed, the display changes to the zoom view.)
• Monitoring will automatically end after 30 seconds.
• It may take several seconds to display the video after pressing
the [ ] button. Please wait for the video to display before
performing the next button operation.
• This function may not be operated due to the equipment being
used.
• With this function, you can monitor only entrance stations with
camera that were set to allow for being monitored at the time of
the installer's setup.
- 8 -
button during monitoring to communicate with