Alarms And Related Info; Option Button; Emergency Alarm - Aiphone GT-1C7-L Operation Manual

5

ALARMS AND RELATED INFO.

5-1

Option button

Pressing the [ ] button allows for connected devices to be activated,
such as turning lights on or off.
5-2

Emergency alarm

1
Press and lock the emergency alarm switch (or when there is a
line - off trouble).
2
An alarm will sound from the residential/tenant station, and a
warning signal will be sent to the security guard station.
GT-1C7-L/GT-1C7
3
When there is a call from the security guard station, the warning
sound will change to a call tone that will sound for the set
amount of time. The status Indicator flashes.
GT-1C7-L/GT-1C7
Flashes.
4
GT-1M3-L/GT-1M3
5
NOTES: • On the residential/tenant station, the emergency alarm and call
GT-1M3-L/GT-1M3
- 11 -
GT-1C7-L/GT-1C7
Press the [ ] button to communicate with the security guard
station. The status indicator will light up. After communication,
the emergency alarm will begin to sound again.
GT-1C7-L/GT-1C7
Lights up.
Release the lock position of the emergency alarm switch to
return to the standby position (restore the system to normal
status).
tone will be emitted at level 10 (HIGH) volume, regardless of
the volume setting.
• The emergency alarm function can be activated even when the
system is in use. (Alarms can be activated at the same time by up
to 5 stations.)
• Residential/tenant stations within the same residence will be
unable to receive normal calls while the emergency alarm is
sounding. It is only possible to respond to calls from the security
guard station.
• During the emergency alarm, the entrance station cannot make
calls to the residential/tenant station or to the security guard
station that is receiving emergency alarms.
USING THE STATION
GT-1M3-L/GT-1M3
GT-1M3-L/GT-1M3