Replacing The Razor Heads; Maintenance - Philips Norelco SmartTouch-XL 9170XLCC User Manual

ENGLISH
32
Cleaning the Jet Clean Canister
For optimal performance of the Jet Clean
System, it is recommended that you empty the
cleaning solution canister and thoroughly rinse
the canister clean every 2 weeks.
Place the Jet Clean System on a flat, level
1
surface.
C
Simultaneously press the buttons located
2
on both sides of the Jet Clean System (1)
and lift the appliance off the Jet Clean
canister (2).
Always remove appliance from canister by lifting
straight up. Do not tilt Jet Clean System.
C
Discard any remaining cleaning solution in
3
the canister.
The cleaning solution can be safely poured down
the sink as there are no harmful ingredients.
C
Simply rinse the canister with warm water.
4
Wipe the canister with a towel or tissue
to remove excess water.
C
Carefully lower the Jet Clean System over
5
the canister making sure the release
buttons snap back into position.
ENGLISH

Replacing the Razor Heads

◗ Replace the razor heads once a year for
optimal shaving results.
◗ Replace damaged or worn razor heads with
model HQ9 Philips Norelco razor heads only.
Razor head check indication
◗ The replacement head indicator symbol starts
blinking to remind you to check if it's time to
replace your razor heads to obtain optimal
shaving results.

Maintenance

◗ Always remove razor from the Jet Clean
System before cleaning appliance.
◗ Unplug the Jet Clean System.The Jet Clean
System may be wiped clean using a damp cloth.
◗ Before refilling transparent cleaning reservoir,
discard remaining cleaning solution and rinse
the outside and inside of the reservoir
completely with warm water from the tap.
◗ Water from the tap should be on a warm
setting to clean all washable parts.
Note; DO NOT place or clean any parts of the
Jet Clean System in a dishwasher.
33