Replacing The Razor Heads; After Each Use: Trimmer - Philips NORELCO Aquatec AT920 User Manual

ENGLISH
22
9 Repeat the process for the other two sets
of cutters and combs.
10 Replace the frame and turn the lock
clockwise until it locks into place.
C
11 Insert the notch of the shaving unit into
the slot in the top of the razor (1) and
1
then close the shaving unit (2).
2
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.

After Each Use: Trimmer

1 Turn razor OFF.
C
2 Push down spring-release trimmer switch.
C
3 Clean trimmer with the short-bristled side
of the brush every time you use it. Brush
up and down along the trimmer teeth.
C
4 Lubricate the trimmer teeth with one
drop of mineral oil every 6 months.
5 Close trimmer by pressing trimmer down.

Replacing the Razor Heads

w Replace the razor heads once a year for
optimal shaving results.
w Replace damaged or worn razor heads with
model HQ9 Philips Norelco razor heads only.
1 Turn razor OFF, remove the charging plug
from the outlet and power cord from the
razor.
C
2 Press the Razor Head Release Button to
open the Razor Head Assembly.
C
3 Pull the shaving unit off the razor.
C
4 Turn the lock counterclockwise to unlock
2
(1) and remove the retaining frame (2).
1
ENGLISH
23