Before Startup - Kärcher A 2054 Me Original Instructions Manual

Hide thumbs Also See for A 2054 Me:
Table of Contents

Advertisement

6 Mains cable with mains plug
7 Swivel casters
8 Container
9 Suction hose connection
10 Suction hose
11 Suction tubes 2 x 0.5 m
12 Floor nozzle with hard surface insert
13 Crevice nozzle
14 Filter bag
15 Cartridge filter (already assembled)

Before Startup

Illustration
Remove the motor casing and take ac-
cessories out of the container.
Illustration
Fit the swivel casters on the container
bottom. Insert filter bag if required.
Illustration
Put motor casing onto container and
lock it.
Start up
Illustration
Connect accessories.
Illustration
Connect the mains plug and turn on the
appliance.
Operations
Always work with an inserted car-
tridge filter - during wet as well as
dry vacuum cleaning!
All accessories are suitable for wet vacu-
uming as well as for dry vacuuming.
Dry vacuum cleaning
For a dust-free disposal of the vacuuming
material we recommend to insert the paper
filter bag as well. This provides the addi-
tional advantage that the cartridge filter will
not become contaminated that quickly.
Work only with a dry cartridge filter!
Therefore: Always let the cartridge filter
dry thoroughly before using it!
Added filter bags can burst!
Change filter bag earlier if you vacuum
cleaning fine dust particles for a longer
period.
Please use the pre-separator accesso-
ry (order no.2.863-139) to such in ash.
Illustration
Vacuuming hard surfaces
Use the hard surface insert.
Illustration
Vacuuming carpeted floors
Work without the hard surface insert.
Wet vacuum cleaning
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Illustration
Using the accessories shown it is possi-
ble to vacuum up liquids.
Note: If the container is full a float closes
the suction opening and the appliance
works at a higher speed. Switch off the ap-
pliance immediately and empty the contain-
er.
Finish operation
Illustration
Turn off the appliance and disconnect
the mains plug.
Empty the container
Remove the motor casing and empty
the container.
Storing the Appliance
Illustration
Place the accessories in the appropri-
ate compartments at the appliance and
store the appliance in a dry room.
9
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents