Operating Commands - Safer PR90 Maintenance Manual

Globalis International
SERIAL
INTERFACE
PAPER FEED
MOTOR
CARRIAGE
TRANSPORT MOTO
AUTOBORDER
PHOTOSENSOR
CARRIAGE RESET
PHOTOSENSOR

1.8. OPERATING COMMANDS

PR9 operating commands are the following:
－ power switch
－ upper mechanical assembly green lifting lever
－ LCD operating panel
1.8.1. POWER SWITCH
The printer is equipped with a two-pole power switch. The switch on/off command
is provided by means of a rod that crosses the printer longitudinally.
1.8.2. UPPER MECHANICAL ASSEMBLY LIFTING LEVER
The upper mechanical assembly lifting lever (1) is located on the left-hand side of
the printer and is used to lift the upper part of the mechanical assembly so that you
PR9 SERVICE MANUAL-VER1.1
POWER CORD
USB
INTERFACE
PARALLEL
INTERFACE
OPERATING
PANEL
PRINTHEAD
FRONT PAPER
DETECTION
PHOTOSENSOR
SERVICES MOTOR
POWER SWITCH/POWER
SUPPLY UNIT
PR9
MAIN BORAD
Page 9 of 112