Table of Contents
Advertisement
Globalis International
Then updating begins, LCD shows as:
PROGRAMMING
After updating is finished successfully, LCD shows as:
UPDATE O.K.
Turn off PR9 and take out the special downloading board. Fit on
normal parallel board and PR9 will work normally after power on.
NOTE1:
If PC's LPT port, which is to be transmit firmware data to PR9, already
has data in its buffer, then updating is forbidden, and please delete the
data in the LPT port: open the 'PRINTERS AND FAX ' window
choose the printer which has print documents
documents"
successfully.
PR9 SERVICE MANUAL-VER1.1
13BB0
wait for a moment till print documents are canceled
select "purge print
Page 110 of 112
Advertisement
Table of Contents
