Safer PR90 Maintenance Manual page 49

Globalis International
rightwards)
The value of adjustment is within a range. That is, there is a maximum
value to increase and a minimum value to reduce.
Entering the adjustment, LCD shows:
Press COMPRESS▼ key or FEED/EJECT▲ key until the LCD shows:
Press STOP▉ key to accept, LCD shows:
If you want to see the print effect, insert A4 sheet, the printer will feed the
paper automatically, print the current margin and eject the sheet
automatically, LCD shows:
Now you can adjust the left margin according your requirement, Press
FEED/EJECT▲ key means reduce based on current value (moving
leftwards), Press COMPRESS▼ key means increase based on the current
value (moving rightwards). If you want to check the print effect, Insert a
sheet, it will print it, the LCD show:
After selecting the value you want, you must press STOP▉key to save, and
the printer will exit the left margin setup and enter the classified selection of
adjustment , LCD shows:
Now you can select other operations you want.
3.3.4.3. TOP MARGIN SETUP:
Press FEED/EJECT▲ key means reduce based on current value
(moving upwards) ,Press COMPRESS▼ key means increase based on
the current value (moving downwards)
The value of adjustment is within a range. That is, there is a maximum
value to increase and a minimum value to reduce.
Entering the adjustment, LCD shows:
Press COMPRESS▼ key or FEED/EJECT▲ key until the LCD shows:
PR9 SERVICE MANUAL-VER1.1 Page 49 of 112