JUKI MOL-254 Engineer's Manual page 81

Disassembling
1. Remove setscrews
2. Loosen setscrews
mark.
3. Remove setscrews
4. Remove setscrews
Assembling
1. Fix sprocket base
2. Fix follower sprocket
At this time, assemble follower sprocket
as against the ball spline shaft.
3. Insert ball spline and fix it with setscrews
Refer to pages 9 and 11 when fixing the ball spline.
Disassembling / Assembling
in ball spline .
in connecting collar and remove the ball spline in the direction of the arrow
fixing follower sprocket
fixing sprocket base
to ball spline with setscrews
and belt guide to sprocket base
so that the deflection in the outer diameter is within 0.05
74
−
and belt guide .
.
.
with setscrews
and .
−
.