How To Jack Up Front Axle; Rear Wheels; How To Jack Up Machine - Kubota BX23S Operator's Manual

BHow to Jack Up Front Axle
To avoid serious injury or death:
A Before jacking up the tractor, park it on a firm
and level ground and chock the rear wheels.
A Fix the front axle to keep it from pivoting.
A Select jacks that withstand the machine weight
and set them up as shown below.
(1) Front axle case
(2) Jack points
BRear Wheels
Rear tread width can not be adjusted.
A Do not turn rear discs to obtain wider tread.
Tire 26x12.00-12 Turf, Bar, and Ind.
Tread
A Always attach tires as shown in the drawings.
A If not attached as illustrated, transmission parts may
be damaged. When re-fitting or adjusting a wheel,
tighten the bolts to the following torques then recheck
after driving the tractor 200m (200yards), after one day
(8 hours) and thereafter every 50 hours (as per
maintenance chart).
TIRES, WHEELS AND BALLAST
A Use the tapered bolts for wheels with beveled or
tapered holes.
(1) Bolt
BHow to Jack Up Machine
To avoid serious injury or death:
A Before jacking up the tractor, park it on a firm
and level ground and chock the front wheels.
A Fix the front axle to keep it from swinging.
A Select a jack that withstands the machine
weight and set it up as shown below.
(1) Frame
(2) Jack point
57
Front 149.2 to 179.0 N-m
(15.2 to 18.3 kgf-m)
(110 to 132 lbf-ft)
Rear 108.5 to 130.2 N-m
(11.1 to 13.3 kgf-m)
(80 to 96 lbf-ft)