Care & Maintenance - Ninja BL740 Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before
inserting or removing any blade assembly and
before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2 Hand Washing: Wash the containers, lids and blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assemblies with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.
Contact with the blades' edges can result in
laceration.
3
Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
15 1-877-646-5288
HOW TO STORE
1
Store the Ninja Professional Blender & Nutri Ninja
®
Cups upright with the blade assembly inside the
corresponding container with the lid secured on top.
Do not place anything on top. Store the rest of the
attachments in a safe place where they will not be
damaged and won't cause harm. Loosely wrap the
power cord around the motor base.
RESETTING THE MOTOR THERMOSTAT
The Ninja Professional Blender & Nutri Ninja Cups features
a unique safety system which prevents damage to the unit's
motor and drive system should you inadvertently overload
your appliance. If the appliance is being overloaded,
the motor will stop. Allow the appliance to cool for
approximately 15 minutes. To reset the appliance, follow
the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the blade assemblies.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
®