Automatic Reception And Manual Reception - Amplicomms TCL 400 Operating Instructions Manual

Reception mode and signal strength
During reception, press WAVE/▼ once will display reception
mode and signal strength indication:
• When strong signal is detected, display shows with 3 bars
.
• When weak or no signal is detected, display shows
or
• During reception, the signal strength may move from 1 bar to 2
bars to 3 bars. This is normal since the clock is detecting radio
controlled time signal and other signals in the air at the same
time.
• Press WAVE/▼ once will return to the time display with
LED flashing.

Automatic reception and manual reception

Automatic reception
Your clock starts automatic reception everyday at 1:00, 2:00, and
3:00. If it fails to receive the radio controlled time time signal at
3:00, it will start reception at 4:00. If it fails again, it will start
reception at 5:00. If it fails again, it will start automatic reception at
1:00 again in the next day.
(See chapter "Helpline" for costs and hours of operation)
.
Helpline UK 0844 800 6503
G
ETTING STARTED
21