ALDI GLEKS 2440 User Manual page 17

Safety
DANGER!
g) The ON/OFF switch must be set to OFF and the power plug
removed from the socket-outlet before cleaning or doing
any other work on the shredder and whenever the cable
becomes tangled. The shredder will continue to run briefly
after it is switched off. There is a risk of electrocution, or
damage to the shredder, if this is not done.
h) The operator is responsible for the safety of third parties
within the working radius of the shredder.
WARNING!
i) Make sure that the shredder is properly closed (loading
tunnel and motor housing) before you start up the motor.
There is a risk of electrocution, or damage to the shredder, if
this is not done.
WARNING!
j) The shredder must be placed on a flat and firm surface
where it can stand securely. If the shredder is not stable
during use and topples over, There is a risk of impact injury,
injury from materials being fed into the loading tunnel inlet,
injury from material being ejected or catapulted from the
ejector chute or damage to the shredder.
DANGER!
k) Each time before you leave the shredder, switch off the
motor and pull out the power plug. If the electric motor is left
running there is a risk of damage or injury.
16
www.einhell.co.uk
66926_3430345_11026_ug_inner.indd 16
Electric Impact Shredder – GLEKS 2440
AFTER SALES SUPPORT
0151 649 1500 1890 946244
22/03/2016 3:22 pm