Table of Contents
Advertisement
Initialization
If something doesn't seem to be operating as you think it
should, you can restore all settings to the factory defaults.
1. Press [
[Advanced Options].
2. Select [Initialization], then press [
3. Select [Yes], and press [
4. [Reset done] is displayed on the screen when the
rest is complete.
When GoVision is powered off, hold the center of the Jog
switch and press and release the Power button. Hold the
Jog Switch until the unit reboots, and all settings should be
restored to the factory defaults.
Copyright© 2016 JAWON MEDICAL CO., LTD.
] on the remote control and select
].
Note
] or [
].
91
Advertisement
Table of Contents
