pressing [
5. To exit the OCR function, press [
If the recognition rate is low at the minimum magnification
rate, please try increasing the magnification rate and
performing the OCR again.
2) OCR Languages
You can add one secondary language in addition to the
system
configuration
documents containing 2 languages.
1. Press [
2. Select [OCR Language], then
3. Select your language and press [
To adjust the pitch, volume and speed of the voice output,
refer to voice settings.
Copyright© 2016 JAWON MEDICAL CO., LTD.
] again resumes reading.
language,
] on the remote control.
] or [
Note
for
] or [
Note
]
recognition
].
of
48