Fuse On The Main Pcb; Check/Correction Of The Language Menu - Casio EX-Z500 Service Manual & Parts List

Hide thumbs Also See for EX-Z500:

Table of Contents

FU100 ............. This fuse may be broken, if the lens works normally but the LCD does not display when the

power switch is turned on.

FU101 ............. This fuse may be btoken in the following cases.

1. All functions do not work when the power switch is turned on.

2. LED under the shutter button does not light when the battery is loaded.

*Referr to "Printed Circuit Board" on the page 30 for the location of the fuse.

After replacing the main PCB, make sure to check that there are ten languages in the language menu.

If there are only seven, make sure to change to ten.

PROCEDURE

1. Copy the script file "autorun" to the root directory of the SD card.

"autorun" is in the Qv/Soft/Adj_soft/EX-S100 of the service CD-ROM.

2. Insert the SD card into the camera and turn the power on.

3. "WRITING LANG ASIA FLAG" appears on the display after a few seconds.

4. "VOID LANG ASIA" appears on the display subsequently.

5. The camera power turns off automatically.

6. Remove the SD card from the camera, turn on the camera, and check that there are ten languages in

the menu. End this procedure if no problem occurs.

FUSE ON THE MAIN PCB

— 18 —

Ten-language menu

Table of Contents