Wiring Diagram - Panasonic FV-08VSL1 Installation Instructions Manual

3. Install the suspension bracket and the flange of fan body
to joists by using long screws (M4X30) ( If spacing A
between joists is 10 1/4~12 inches, install the flange of
fan body according to Fig.3-2, others according to
Fig.3-1 install the product.)
4. Install the suspension bracket to joists by using long
screws (M4X30) and secure it to the fan body by
II
using screw (M4X12). (Fig.4)
5. Remove junction box cover and secure conduit or
stress relief to junction box knock-out hole. (Fig.5)
6. Refer to wiring diagram below.
Using wire nuts, connect house power wires to
ventilating fan wires:
black to black; white to white; green to green;
Replace the junction box cover. (Fig.5)
CAUTION:
Mount junction box cover carefully so that lead
wires are not pinched.
7. Install a circular duct and secure it with duct tape or
clamps.
Fan body
Joist
4 Long screws(M4X30)
A = 10 1/4~12 inches
Fan body
2 Long screws
(M4X30)
Circular duct
Conduit
Junction box cover
Conduit
Junction box
Lead wires
Green wires
7
Fig.3-1
Joist
2 Long screws
(M4X30)
Fig.3-2
II Fig.4
screw (M4X12)
Duct tape
Wire nut
Fig. 5