Supplied Accessories - Panasonic FV-08VSL1 Installation Instructions Manual

FV-08VSL1
Specifications are based on HVI standard.
Unpack and carefully remove unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.
1. Do not install this ventilating fan where air temperature may exceed 40 C (104 F).
2. Make certain that the electric service supply voltage is 120V, 60 Hz.
3. Follow all local electrical and safety codes, as well as the National Electrical Code (NEC) and the
Occupation Safety and Health Act (OSHA).
4. Always disconnect the power source before working on or near the fan, motor, light fixture or junction box.
5. Protect the power cord from sharp edges, oil, grease, hot surfaces, chemicals or other objects.
6. Do not kink the power cord.
7. Do not install the unit where ducts are configured as shown in Fig. A.
8. Provide suction parts with proper ventilation.
9. This unit is UL listed for use over a bathtub or shower when installed in a GFCI protected branch circuit.
Prohibition
Duct
Noise
diameter
(sone)
(inches)
3 1.3 26
Prohibition
18 X 2 4
o
Prohibition
Fig. A
(rpm) (cfm)
944 80
o
Adaptor
Prohibition
6.1 13.4 ( )