Maintenance - Panasonic FV-08VSL1 Installation Instructions Manual

4. Follow step 5 to 11 of installation (page 7, page 8)
to complete the installation work.
1. Installation in existing construction.
Installing the ventilating fan in an existing building requires an accessible area (attic or crawl space) above
the planned installation location or existing ducting and wiring.
(1) To install the ventilating fan, follow the procedures described in lnstallation . Take the following
precautions before installation.
CAUTION:
Check area above planning installation location to be sure that:
1. Duct work can be done and that area is sufficient for proper ventilation.
2. Wiring can be run to planned location.
3. No wiring or other obstructions shall interfere with installation.
(2) Inspect duct work and wiring before proceeding with installation.
(3) Plan suitable location for ventilating fan. (next to ceiling joist)
(4) Before installation, provide inspection and maintenance access at a location that will not interfere
with installation work shown in installation . II
(5) First, remove ceiling section according to Fig.6 of page 8.
(6) Install ventilating fan.
2. Installation from accessible area above fan location.
(1) Inspect duct work and wiring before proceeding with installation.
(2) Remove ceiling section according to Fig.6 of page 8.
(3) Install ventilating fan.
I
12
Junction box
6 Long screws
(M4X30)
Conduit
Junction box
Lead wires
Green wires
II
Circular duct
Wire nut
Fig.21