Additional Functions - Electrolux EVD29900AX User Manual

Vacuum sealer
Table of Contents

Advertisement

Available languages

Available languages

11
www.electrolux.com
Marinating in the pouch
Use the ON/OFF switch -1- located to
the left of the control panel to switch
the appliance on.
Place the food with the marinade
inside the pouch.
Place the pouch inside the tank.

9. ADDITIONAL FUNCTIONS

9.1.
P6 "External vacuum"
This program must be used to eliminate
the air inside special air-tight containers
(not supplied with this product).
Unscrew the intake fitting placed inside
the tank
Tighten the "external vacuum" fitting
Connect this fitting to the container
using the intake pipe.
With the open cover, start the program
by pressing Start -8-.
This program allows only the "vacuum"
program to be set
Select one of the programs between
P1 and P5 with vacuum at 99.9% and
sealing time set at 2 seconds, using
keys -9- and -10-.
Close the cover and press Start -8-.
Open the cover, as soon as the display
shows the program (e.g. P1).
Store in the refrigerator for 9-12 hours.
9.2.
P7 "Conditioning program"
This program must be used in the
following situations:
Before using the machine for the first
time.
After a long stop period.
After having sealed products with high
humidity content (e.g. soups).
When you notice a decrease in
performance of the machine (e.g.: time
to reach vacuum is increased or it
does not reach it at all).
This program lasts about 3 minutes and
ensures a complete cleaning of the
pump, removing any liquid emulsion that
might be found in the oil. Do not seal any
product while this program is running.
This program has no set variables.
Follow the indications below to start the
program:
Close the cover with the empty tank
Select program P7 using keys
and -10-.
Press Start -8-.
Wait for the cycle to end (about 3
minutes).
At the end of the cycle, the display
shows P7 again.
Now the machine is ready for use
-9-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents