Seagate SRPS20 Administration Manual page 30

4. Choose Run.
5. Choose Yes.
6. Check the box next to I have read and accept the license terms and then choose Next.
7. Enter the applicable User name and Password that you created in the WSS NAS's dashboard. .
8. Choose Next. It can take several minutes for the connector to complete the installation. .
9. Choose Restart.
10. Upon restart, you are prompted to choose how many users can log on to the computer. Note that the
default setting is to migrate data and settings from the PC's local user accounts. You can choose to skip
the migration by checking the box on the bottom of the window.
Important info:Checking the box will delete data on the PC.

Seagate WSS NAS Administratio n Guide 6/26/15 30