Customer Assistance; Terminology - Hedman HF-400 Operating Manual

HF-400
Introduction Operating Manual

Customer Assistance

Should you encounter any problems with this machine or not
understand its many features, please refer to this manual.
If you require further assistance after reading this manual,
please contact the authorized Hedman Dealer or Distributor
for your location. These authorized Hedman Representatives
employ factory trained service technicians and stock genuine
Hedman spare parts.
To find the authorized Hedman Dealer or Distributor for your
area, call 847-718-6500 or visit our Web site www.hedman-
co.com.

Terminology

Several terms have specific meanings as they are used in this manual:
DOUBLE-PARALLEL FOLD
A fold that divides the sheet into four panels. Useful for inserting
legal size sheets into business envelopes. This fold cannot be
made in sheets smaller than legal size.
EXIT END
The left end of the HF-400 where the folded documents exit the
machine.
FEED END
The right end of the HF-400 where the flat documents are placed
to enter the folding process.
FOLD TABLE
The sloping portion of the HF-400 that controls the position of
the fold on the document. The first fold is formed when the doc-
ument is in the fold table to the right; the second fold is formed
when the document is in the fold table to the left.
GATE FOLD
A fold that divides the sheet into one panel that is half the length
of the sheet and two overlapping panels one quarter the length of
the sheet.
6
Rev. 12/04