Introduction
Controls and Indicators
This page and the next page show the HF-400
with the feed and exit devices folded to conserve
table space when the machine is not in use.
NOTE
The stacker assembly must be removed (see page
11) in order to fold up the exit conveyor and tray.
See pages 4 and 5 for additional controls and indi-
cators.
1
2
Rev. 12/04
1. Exit Tray Retaining Screw
(No. 2 Phillips)
2. Exit Conveyor Foot
3. Exit Conveyor Latch
(pull to release)
4. Exit Conveyor (folds down)
5. Exit Tray
5
4
3
2
HF-400
Operating Manual