Progressive Scan; Display - Philips DVP3200V/37 User Manual

Digital video disc player & video cassette recorder

Hide thumbs Also See for DVP3200V/37:

Quick start manual (2 pages)

Table Of Contents

Table of Contents

E8A21UD_EN2 5/17/06 6:13 PM Page 61

●

If you selected STILL MODE, press K or L to

select a setting, then press OK. This determines the

quality of an image in still mode.

If you select FIELD, still images will be stabilized but

coarse due to the small amount of data.

If you select FRAME, the images will be highly defined due

to the simultaneous output of two fields.

The default setting is AUTO.

DISPLAY

STILL MODE

AUTO

FIELD

FRAME

STILL MODE

Press DVD/SETUP to remove the menu.

You may adjust the Progressive Scan compatibility.

Follow the steps 1-4 in the Display setup on page 60.

Press K or L to select PROG. SCAN, then press OK

repeatedly to turn PROG. SCAN ON or OFF.

Choose ON if your TV has Progressive Scan and if the TV

is connected to the player's COMPONENT VIDEO OUT

jacks. Choose OFF otherwise.

The default setting is OFF.

Press DVD/SETUP to remove the menu.

●

If PROG. SCAN is ON, this message appears:

Press K or L to make a selection, then press OK.

If you select NO, the menu disappears and

PROG. SCAN is OFF. If you select YES, this appears:

Confirm again to use progressive scan.

If Picture is good, Select "YES".

SELECT: K / L

Confirm your setting, then press OK. The menu will dis-

appear and the Progressive Scan function will be activated.

If you do not press any buttons for 15 seconds,

Progressive Scan will switch to OFF.

YES

SET:OK

Display (cont'd) 61

TV/VIDEO

VCR

DVD

VCR Plus+

SUBTITLE

AUDIO

ANGLE

ZOOM

DISC/VCR

DVD

SETUP

BACK

DISPLAY

PLAY

REW

FFW

PAUSE