DVP 3055V DVP 3055V DVD VIDEO PLAYER / VIDEO CASSETTE RECORDER...
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude...
Important Note Advarsel: Laserrudstråling ved åbning når sikkerhesafbrydere er ude af funktion. Undgå u tsættelse for stråling. Bemærk: Netafbryderen POWER er sekundært indkoblet og afbryder ikke strømmen fra nette. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten. Observer: Nettbryteren POWER er sekundert innkoplet.
Contents Introduction Safety Precautions ...2 Important Note ...3 Contents ...4 Before Use ...5-6 Playable Discs ...5 Remote Control Operation Range ...5 Precautions ...6 Notes on Discs ...6 About Symbols ...6 Selecting the Viewing Source...6 Front Panel and Display Window ...7 Remote Control ...8 Rear Panel ...9 Preparation...
Playable Discs (8 cm / 12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play DVD±R, DVD±RW, SVCD, and CD-R or CD-RW that contains audio titles, MP3/Windows Media Audio and/or JPEG files.
Before Use (Cont’d) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting the unit The picture and sound of a nearby TV or radio may be distorted during playback.
PAUSE( \ \ \ \ ) Pause palyback Disc Tray temporarily/ frame- Insert a disc here. by-frame playback. STOP ( x x ) Stops playback. Forward Skip/Scan/Fast-Forward Go to NEXT chapter/track.Press and hold for two seconds for a fast forward search. Winds the tape forwards.
Remote Control DVD/VCR select button Select the output source (DVD or VCR) to view on the TV screen. TV/VIDEO To view channels selected by the VCR tuner or by the TV tuner. 0-9 numerical buttons Selects numbered options in a menu. DISC MENU Accesses menu on a DVD disc.
VIDEO/AUDIO OUT(Left/Right) (DVD/VCR OUT) Connect to a TV with video and audio inputs. COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD EXCLUSIVE OUT) Connect to a TV with Y Pb Pr inputs. AERIAL Connect the aerial using this jack. AUDIO OUT (Left/Right) (DVD EXCLUSIVE OUT) Connect to an amplifier, receiver or stereo system.
Connections Tips G Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. G Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. G For better sound reproduction, connect this unit’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment.
Connecting to Optional Equipment Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/ Pro Logic Connect the Left and Right DVD/VCR AUDIO OUT or AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.
Before Operation - VCR part Tuning in a video channel on your Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the DVD+VCR through the RF cable. If you have used a lead you will not have to tune SCART your TV, simply select the AV channel.The AV channel is...
Setting the clock Manually The clock in your DVD+VCR controls time and date settings for your DVD+VCR. The clock is set automatically during ACMS (Automatic Channel Memory System) when you DVD+VCR detects a channel that broadcasts a Teletext signal. If the broadcast signal is weak the clock will not be set and will require setting manually.
Before Operation - VCR part How to using the main menu This VCR can easily be programmed by using the menus displayed on screen. The menus are controlled from the Remote Control Handset. Switch on your TV set and video recorder by pressing the 1 1 button.
Tuning in TV Stations Manually In certain areas of the country broadcast signals may be too weak for your VCR’s automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually in order for your VCR to store them. Press SYSTEM MENU.
Before Operation - VCR part Changing the order of TV Stations After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them again.The instructions given on this page will show you how you can simply move them into your desired order.
General Explanation This manual gives the basic instructions for operating the DVD+VCR. Some DVDs require specific operation or allow only limited operation during playback.When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD+VCR or is not available on the disc.
Before Operation (Continued) - DVD part Initial Settings You can set your own Personal Preferences on the player. To display and exit the Menu: Press SYSTEM MENU to display the menu. Press SYSTEM MENU again to return to the initial screen. To go to the next level: Press 2 on the remote control.
AUDIO Each DVD disc has a variety of audio output options. Set the DVD+VCR’s AUDIO according to the type of audio system you use. AUDIO Bitstream Dolby Digital MPEG Sample Freq. 48kHz Move Dolby Digital / MPEG Bitstream: Select “Bitstream” if you connected the DVD+VCR’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital decoder or MPEG decoder.
Before Operation (Continued) - DVD part LOCK (Parental Control) LOCK Rating Unlock Password Area Code Move Rating Movies on DVDs may contain scenes not suitable for children.Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc.These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs.
Playing a tape You will only be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC tapes (on PAL TV). Getting a better picture When a cassette is inserted and playback started, the automatic tracking function works to get the best possible picture automatically.
Operation with tape (Continued) Instant Timer Recording (ITR) Your VCR allows you to make recordings using a variety of simple methods: Instant Timer Recording (ITR) start recording immediately for a set period of time or until the video cassette runs out. Your DVD+VCR incorporates Long Play (LP) which enables you to record up to twice the amount of time on a video cassette.
Timer recording using On Screen Display You may set up to seven timer record events within one month of the current date. Note Before setting the timer make sure that you have set the DVD+VCR clock correctly and you know which PR numbers have been assigned to the TV stations you have tuned on your DVD+VCR.
Operation with DVD and Video CD Playing a DVD and Video CD VCD2.0 VCD1.1 Playback Setup G Turn on the TV and select the video input source connected to the DVD player. G Audio system:Turn on the audio system and select the input source connected to the DVD player.
General Features (continued) VCD2.0 VCD1.1 Slow Motion Press T during still mode. The player will enter SLOW mode. Press T repeatedly to select the required speed : T 1/7, T 1/6, T 1/4 or T 1/2 (forward). To exit slow motion mode, press PLAY B. Note G Slow motion playback in reverse is not applicable.
Operation with DVD and Video CD General Features (continued) VCD2.0 VCD1.1 Zoom The Zoom function allows you to enlarge the video image and to move through the enlarged image. Press ZOOM during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture.
Operation with Audio and MP3/Windows Media Playing an Audio CD and MP3/Windows Media Audio Disc The DVD Player can play MP3/Windows Media formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/Windows Media recordings, read the notes on MP3/Windows Media Audio Recordings on right.
Operation with Audio and MP3/Windows Media Pause Press PAUSE/STEP during playback. To return to playback, press PLAY B, OK or press PAUSE/STEP again. Moving to another Track Press S or T briefly during playback to go to the next track or to return to the beginning of the current track.
JPEG Viewing a JPEG disc This DVD+VCR can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. Press 3/4 to select a folder then press OK.
Programmed Playback Programmed Playback with Audio CD and MP3/Windows Media Audio Disc The Program function enables you to store your favorite tracks from any disc in the player memory. Program can contain 30 tracks. Press PROGRAM during playback or in the stop mode to enter the Program Edit mode.
On Screen Display You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape.
Additional Operation (Continued) Hi-Fi Stereo Sound System Your VCR will record and playback Hi-Fi stereo sound. In addition it has a stereo NICAM digital stereo sound decoder.This allows you to record and playback the sound in several different ways.Video cassettes recorded on your VCR will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks.These stereo tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode...
Copying from DVD To VCR This unit allows you to copy the contents of a DVD to a VHS tape with a press of the D.DUBBING button. Notes G Be sure to set ‘Progressive Scan’ to “Off” on the setup menu.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom DVD or VCR do not G DVD or VCR button is not switched work properly. properly. No power. G The power cord is disconnected. The power is on, but the G No disc is inserted.
Enter the appropriate code number for the initial settings “LANGUAGE” (See page 18). Code Language Code 6566 Abkhazian 7074 6565 Afar 7073 6570 Afrikaans 7082 8381 Albanian 7089 6577 Ameharic 7176 6582 Arabic 7565 7289 Armenian 6869 6583 Assamese 6976 6588 Aymara 7576...
Country/Area Code List Enter the appropriate code number for the initial setting “Country Code” (See page 20). Code Country/Area Code Country/Area Andorra Eritrea United Arab Emirates Spain Afghanistan Ethiopia Antigua and Barbuda Finland Anguilla Fiji Albania Falkland Islands Armenia Micronesia Netherlands Antilles Faroe Islands Angola...
General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Timer RF Modulator System Laser Video Head system Signal system Frequency response Signal-to-noise ratio Harmonic distortion Dynamic range Inputs (VCR) Audio Video Outputs (DVD) VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT (Progressive Scan) RGB output...
Phone: 800 820026 PHILIPS MÁRKASZERVIZ Kinizsi U 30 - 36 Budapest 1092 HUNGARY Phone: (01)-2164428 CLASS 1 LASER PRODUCT Meet Philips at the Internet http://www.philips.com PHILIPS PORTUGUESA, S.A. Consumer Information Center Rua Dr. António Loureiro Borge, nr.5 Arquiparque, Miraflores P-2795 L-A-VEHLA PORTUGAL...