Download Print this page

Philips DVP3200V/37B Quick Start Manual

Dvd/vcr player
Hide thumbs Also See for DVP3200V/37B:

Advertisement

Quick Links

E8A21UD_QSG_EN
4/3/06
5:22 PM
There are many ways to connect your new DVD / VCR to your Television and other equipment.This Quick Start
Guide shows the easiest, most common connection.
Higher quality connections are explained in the accompanying owner's manual and will provide better sound or
picture if your TV and/or audio system is compatible.
CABLE BOX
(Optional)
Disconnect all equipment from the power outlets. Connect the equipment to the power outlets only after you
1
have finished hooking up everything. Never make or change connections with equipment connected to the power outlet.
Connect your Antenna TV signal or, if you have a Cable Box/Satellite Receiver, the OUT jack of your Cable
2
Box/Satellite Receiver to the ANT -IN jack on the rear of the DVD/VCR using the supplied RF coaxial cable.
Connect another RF coaxial cable (not supplied) to the DVD / VCR's ANT -OUT jack and to your TV's
3
ANTENNA IN jack. The TV's ANTENNA IN jack may be labelled 75-ohm,TV IN, or RF IN. Check your TV manual for details.
Connect the red and white audio cable (supplied) to the red and white DVD/VCR AUDIO OUT jacks on
4
the DVD/VCR and to the red and white AUDIO IN jacks on the TV.
Connect the yellow video cable (supplied) to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to
5
the VIDEO IN jack on the TV. The VIDEO IN jack on the TV is usually yellow and may be labelled CVBS, Composite,
or Baseband video.
Plug the power cords of the DVD / VCR and the TV into an active power outlet.
6
Turn on the TV and set it to the correct Audio/Video In channel.
7
y
Press
or STANDBY-ON
8
the DVD / VCR, you should complete the First-time DVD/VCR Setup. See the other side of this Quick
Start Guide for details.
Page 1
DVP3200V/37
IN
OUT
OR
ANTENNA or
CABLE TV SIGNAL
CABLE TV SIGNAL
2
Antenna or Cable TV Signal to ANT-IN Jack
y
on the front panel to turn on the DVD / VCR. The first time you turn on
3
RF COAXIAL CABLE
4
Audio Cable
5
Video Cable
REAR OF TV
(EXAMPLE ONLY)
ANTENNA IN
AUDIO IN
L
R
VIDEO IN
Audio and Video IN Jacks on TV

Advertisement

loading

Summary of Contents for Philips DVP3200V/37B

  • Page 1 E8A21UD_QSG_EN 4/3/06 5:22 PM Page 1 There are many ways to connect your new DVD / VCR to your Television and other equipment.This Quick Start Guide shows the easiest, most common connection. Higher quality connections are explained in the accompanying owner’s manual and will provide better sound or picture if your TV and/or audio system is compatible.
  • Page 2 DVDs must be recorded in either the NTSC or PAL color system. Your TV must also have the NTSC or PAL color system. NEED HELP! Visit our website at www.philips.com/usasupport Turn on the TV and set it to the correct Audio/Video In channel.

This manual is also suitable for:

Dvp3200v/37Dvp3200v