Channel Setup Settings - Philips DVDR3430V User Manual

DVD Setup Menu Options

CHANNEL SETUP settings

Channel
Name P001/Ch003
Scan mode Frequency
Frequency
585.26MHz
TV System PAL B/G
NICAM
On
Audio
DUAL A
Decoder
Off
Skip
No
Fine-tune
OK CANCEL
OK
Sort Channels
Sort Channels
P001 BC020 Skip
P002
SW006 Unskip
P003 CH008 Unskip
P003 CH008 Unskip
P004 CH004 Unskip
P005
CH006 Skip
P006 CH010 Unskip
P007 CH012 Unskip
P008 CH005
Unskip
58
{ NICAM } – NICAM is a digital sound transmission
system. It can transmit either one stereo
channel or two separate mono channels.
{ On }
{ Off }
{ Audio } – For bilingual TV programmes, you can switch
between stereo (original) and additional
audio language.
{ DUAL A } – Original broadcast language.
{ DUAL B } – Additional audio language.
{ Decoder } – If the current TV channel is transmitted by
coded TV signals that can only be viewed
properly with a decoder which is connected
to the EXT2 AUX-I/O socket, you need to
activate the connected decoder.
{ On }
{ Off }
{ Skip } – Select this to set the channel to be skipped.
{ No }
{ Yes }
{ Fine-Tune } – Select this to fi ne-tune the TV channel
manually if the reception is poor. Use
keys to adjust the frequency and press OK
to confi rm.
Rearrange the stored TV channels.
1) Use keys to highlight { Sort Channels } and press OK
to show a list of TV channel programmes.
2) Use keys to highlight the channel you want to change
and press OK.
3) Use keys to shift the TV channel to the desired position
and press OK again. The selected channel will be inserted
before the current position.
Note: Press BACK on the remote control to go back to the previous
menu.
(continued)
– Improve the sound transmission
of the TV channel.
– Select this if the reception is poor
and the sound is distorted.
– Select this to allocate the connected
decoder to this TV channel.
– Turn off the decoder feature.
– The TV channel can be accessible
+ −
using the P
control.
– The TV channel can only be
accessible by pressing the
corresponding number button on
the remote control.
on the remote