Channel Setup Settings - Philips DVDR3512V User Manual

Setup Menu Options

Channel Setup settings

Channel Search
Setup - Channel Setup
Channel Search
Modify Channel Information
Sort Channels
Modify Channel
Information
Channel
Name
P001/Ch003
Frequency
Scan mode
Frequency 585.26MHz
TV System PAL B/G
NICAM On
Audio
DUAL A
Decoder
Off
Skip
No
Fine-tune
OK CANCEL
OK
58
DVDR3510V_eng_26244.indd 58 DVDR3510V_eng_26244.indd 58
(continued)
This option automatically scans all the receivable analogue local
TV channels and stores these channels on the recorder.
Press OK on the remote control to start the automatic TV
Search
channel search process and replace all previously stored analogue
Edit
TV channels. This process may take several minutes.
Sort
Adjust a stored TV channel to your preference and improve the
reception and the sound quality of that TV channel.
1) Use keys to highlight { Modify Channel Information }
and press OK to view the channel menu.
2) Use keys to select one of the options and press OK.
{ Name }
{ Scan Mode } – Select TV channel search mode based on
{ Frequency } – Show the frequency of the current TV
{ TV System } – Use
– Use the numeric keypad 0-9 to select the
channel preset number that you wish to
change.
– To rename the channel, press
– Use keys to highlight a character
in the keyboard screen and press OK to
select.
Note: The maximum input is up to 5 (fi ve)
characters.
– Select on the keyboard to confi rm
OK
your entry or select
press OK to exit.
channel allocation or frequency (Frequency,
Channel or S-Channel) and press OK to
confi rm.
channel. If required, use
the automatic frequency search and press
OK to confi rm.
keys to select a suitable TV system
that produces the least distortion of picture
and sound, then press OK to confi rm. (See
chapter "TV System Guide" at the back of
this manual for more information).
.
EXIT to abort, then
keys to start
2007-08-01 1:46:25 PM 2007-08-01 1:46:25 PM