Start-Up; Set-Up And Mounting - HomeMatic HmIP-HAP-UK Mounting Instruction And Operating Manual

Hide thumbs Also See for HmIP-HAP-UK:
Table of Contents

Advertisement

The device is not a toy; do not allow children to
play with it. Do not leave packaging material
lying around. Plastic films/bags, pieces of
polystyrene, etc. can be dangerous in the
hands of a child.
For power supply, only use the original plug-in
mains adapter (5 V
/550 mA) delivered with
DC
the device.
The device may only be connected to an easily
accessible power socket outlet. The mains
adapter must be pulled out if a hazard occurs.
Always lay cables in such a way that they do not
become a risk to people and domestic animals.
The device may only be operated within
residential buildings.
Using the device for any purpose other than
that described in this operating manual does
not fall within the scope of intended use and
shall invalidate any warranty or liability.
5

Start-up

This section describes how to set up your Homematic IP
system step by step.
First install the Homematic IP app on your smartphone
and set up your Access Point as described in the fol-
lowing sections. Once your Access Point has been
installed successfully, you can add and integrate new
Homematic IP devices to your system.
5.1

Set-up and mounting

The Homematic IP app is available for iOS and
Android and can be downloaded for free in the
corresponding app stores.
Please download the app in the app store and
install it on your smartphone.
Start the app.
Place the Access Point close to your router and
a socket.
Always keep a minimum distance of 50 cm
between the Homematic IP Access Point and
your WLAN router.
Start-up
7

Advertisement

Table of Contents
loading

Table of Contents