Bosch DICENTIS User Manual page 18

18 en | DICENTIS multimedia device operation
If prepared voting is used, different sets of voting buttons are available depending on the
answer set selected during voting preparation.
When voting is opened, the vote buttons are all colored, for example: For (Green), Against
(Red), Abstain (Yellow).
After a vote is cast, these buttons change color:
–
–
–
Manage voting result (secretary or clerk)
The voting choice is displayed above the vote button as a bar graph.
Different options are available for displaying the cast votes (for more information, refer to the
section Meeting application > Prepare > Voting round details in the "Software Manual"):
–
–
Use the Accept and Reject buttons to finalize the voting round:
–
–
2016.09 | V2.0 |
Open voting: Only the selected button is colored after the vote is cast.
Secret voting or prevent influence when voting: All buttons are gray after the vote is cast.
Other participants cannot see your voting choice.
If timed voting is being used, the time available for voting is displayed at the top right
hand side of the display.
Only the cast vote of the participant is displayed on the DICENTIS multimedia device –
prevents participants being influenced by the voting choice of other participants.
The cast vote, as well as a live update of the total number of votes for each voting choice,
is displayed on the DICENTIS multimedia device, as shown in the following figure:
Accept button: To confirm that the motion is accepted.
Reject button: To confirm that the motion is rejected. The voting round can be held at
another time.
User manual
DICENTIS
Bosch Security Systems B.V.