Renault ZOE Driver's Handbook Manual page 67

triP cOmPUter: general information
trip mileage resetting
With "trip mileage recorder" selected on
the display, press the button 2 or 3 until
the mileage recorder resets to zero.
resetting the journey
parameters (reset button)
with the display showing one of the
journey parameters, press button 2 or 3
until the display is reset.
1.62
(2/2)
Automatic resetting of the
journey parameters
Resetting occurs automatically when
2
the maximum value of any of the pa-
rameters is exceeded.
reading energy consumption
values
Some vehicle equipment items con-
3 sume energy: the energy consumed
by the vehicle may therefore differ from
the energy consumed on the electric
counter.
interpreting some of the
values displayed after
resetting
The values showing average energy
consumption and average speed will
become more stable and reliable the
further you have travelled since the last
time the Reset button was pressed.
resetting the estimated
range
After a full recharge of the traction bat-
tery, you can select two types of reset-
ting: manual or automatic.
manual reset
With one of the trip parameters selected
on the display, press and hold one of
buttons 2 or 3 to reset the estimated
range to about 80 miles (130 km).
Automatic reset
The range is automatically reset at the
end of a full recharge of the traction
battery to a value calculated based on
the energy consumption over the last
125 miles (200 km).
Some on-board computer infor-
mation appears on the navigation
system display.
Resetting the mileage recorder, the
trip settings, etc. is done simulta-
neously on the on-board computer
and the navigation system.