Sharp EL-5060 Operation Manual page 80

[Determination of the Angular Unit]
The following three angular units (degrees, radians, and grades)
can be specified.
• DEG (°)
• RAD (rad) : Press "01.
• GRAD (g) : Press "02.
[Selecting the Display Notation and Decimal Places]
Four display notation systems are used to display calculation
results: Floating point; Fixed decimal point; Scientific notation;
and Engineering notation.
• When the FIX, SCI, or ENG symbol is displayed, the number of
decimal places (TAB) can be set to any value between 0 and 9.
Displayed values will be reduced to the corresponding number of
digits.
[Setting the Floating Point Numbers System in Scientific Notation]
Two settings are used to display a floating point number: NORM1
(default setting) and NORM2. A number is automatically dis-
played in scientific notation outside a preset range:
• NORM1: 0.000000001 ≤ | x | ≤ 9999999999
• NORM2: 0.01 ≤ | x | ≤ 9999999999
100000÷3=
[NORM1]
→[FIX]
[TAB 2]
→[SCI]
→[ENG]
→[NORM1]
3÷1000=
[NORM1]
→[NORM2]
→[NORM1]
: Press "00.
ª 100000 / 3 = 33'333.33333
"10
"22
"11
"12
"13
ª 3 / 1000 =
"14
"13
– E-8 –
33'333.33333
33'333.33
3.33 × 10
33.33 × 10
33'333.33333
0.003
3. × 10
0.003
04–
03–
–03