Controlling Tv With The Recorder's Remote Control - Philips DVDR3360H User Manual

Controlling TV with the
recorder's remote control
This DVD recorder's remote control has
a universal TV control function that
enables you to control the basic functions
of your TV (Power, Volume and Channel
Control), regardless of the TV's brand.
A
Hold down digit keys {1} and {3}
together until the TV LED blinks twice.
B
Within 10 seconds, enter digit key {0}
followed by the remote control's three-
digit command code number (see last page
of this manual), based on your TV's brand.
If the code entered is valid, the TV
LED will blink twice.
If more than one code number is
listed, try entering them one at a time.
C
Turn on the TV and try to perform the
following operations using the recorder's
remote control.
If your TV does not react to the buttons
pressed, repeat steps 1 to 3 with another
code number listed for your TV's brand
until you have found the correct code
that works with your TV.
Operations
Buttons
2
Turns your TV on or off.
TV VOL +/-
Adjusts the volume of your
TV.
CH +/-
Selects the TV programme
on your TV.
Digit keys (0-9)
Remote Control
Note: You must be in the TV mode to
perform above operations. If not, press
SELECT DEVICE to select 'TV' mode.
Additional control functions for
most of the Philips TV
TEXT Turns on/off the Teletext (TXT).
TIMER Turns on/off clock display.
BACK Returns to the previous menu step.
SYSTEM Calls up the system menu from
the TV.
Navigation keys in the TV menu.
TUNER Switches to TV internal tuner mode.
Helpful Hints
– Depending on the connected unit, you may
not able to control your TV or other devices with
some or all of the buttons mentioned above.
– When the batteries of the remote control
are removed, the code setting will be
retained for 5 (fi ve) minutes during batteries
replacement. After fi ve minutes without
batteries, the remote control will reset to its
default settings.
Using the DVDR9000H remote
control together with the Philips
Cineos DVP9000S and DFR9000
The main functions of the DVP9000S and
DFR9000 can be controlled with this
remote control (e.g. PLAY, TUNER,
SYSTEM).
Additionally, the following functions are
enabled in the SACD and AMP modes to
allow maximum control of your Cineos
9000 series equipment:
Product
DVP9000S or
Philips SACD/
DVD players
DVDR9000H
SACD mode
Remote control
T/C
DISC MENU
HDD
SOUND
BROWSER
MODE
(continued)
DFR9000
AMP mode
Select main source:
SACD, DVD, SAT,
TV, GAME,
DVD+RW, HDTV
SURROUND
MODE
15