Display panel symbols/messages
The following symbols/messages may
appear on your recorder display:
Multifunction display/text line
– Title/track number
– Total/elapsed/remaining title/track time
– Disc/title name
– Error or warning messages
– Additional information regarding the disc
– TV channel number or source of video
– Clock (This is displayed in Standby mode).
– TV programme title
Tuner is selected as visible source.
Camara mode is the current active source.
Disc is the current active source.
Hard disk is the current active source.
Digital TV tuner is the current active source.
The video output is in progressive scan quality.
Pixel Plus picture enhancement is turned on.
A timer recording has been programmed or is
The recorder is prepared for satellite
The disc tray cannot be opened or closed due
to some mechanical obstruction.
Disc tray is closing.
The recorder is busy making changes to make
the disc DVD-compatible.
The DVD/video cassette you are trying to
copy is copy-protected.
After the fi rst recording has been successfully
complete on a new disc, the menu structure is
An error occurred when writing the title. If
this happens often, clean the disc or use a new
Disc is full. There is no storage space for new
– Updating of disc is done after the editing is
– Entire disc is being erased.
An error occurred when writing the title. The
recording will continue, but the error will be
Inserted disc is new or has been completely
erased (no recordings present).
An empty title was selected.