Synchronized Digital Recording - Cd-Sync - Philips CDR 760 Instructions For Use Manual

Start digital recording
1 With the recorder stopped, press RECORD to enter the
Record standby mode.
➜
will flash.
RECORD
AUTO TRACK REPEAT 1 TOTAL
DIG
ANALOG
PROG
RECORDABLE L
• If also flashes, the digital connection is incorrect.
DIG
2 To start recording, press PLAY and immediately start the
source (from stop mode).
➜
lights continuously. The track number and
RECORD
recording time used will be indicated on the display.
• To record a 3-second silence at the start of a track, press
PAUSE.
• To check the (remaining) recording time, press DISPLAY.
(This can also be done during the recording.)
3 To stop recording, press STOP on the CD recorder.
➜
will go out.
RECORD
• To interrupt recording, press PAUSE.
➜
starts to flash. Resume at step 2.
RECORD
After recording the display will show UPDATE for several
seconds.
Note: With on, the recorder will stop
AUTO TRACK
automatically. Recordings from DAT or DCC will stop
after 20 seconds silence. With
mode is disabled.
STOP
REM TRACK TIME
CD SYNC
RECORD
FINALIZE
ERASE
COPY
Preparing for synchronized digital recording
The CD-SYNC feature enables you to make a fast and easy
digital recording of a CD. Track increments are automatically
detected from the digital source material. Track increments
cannot be added manually.
1 Make sure the disc is absolutely free of scratches and dust
2 Press Source repeatedly until (depending on the connection
Start synchronized digital recording
1 With the CD recorder stopped, press CD-SYNC.
off, the
AUTO TRACK AUTO
• If
2 To start recording, press Play on the digital source.
• If you start the source during a track, CD-SYNC will not
• To check the (remaining) recording time, press Display.
3 To stop recording, press STOP on the CD recorder.
• To interrupt recording, press PAUSE.

Synchronized digital recording - CD-SYNC

R EC O R D
FI N A LI ZE
ER A S E
Re co rd ab
le
particles.
used):
➜ COAXIAL or OPTICAL will appear on the
DIG DIG
display.
➜ On the display, & SYNC appears. After a time,
-
CD SYNC
starts to flash.
RECORD
DIG AUTO TRACK REPEAT 1 TOTAL
ALOG
PROG
also flashes, the digital connection is incorrect.
DIG
➜ The CD recorder automatically starts to record and
lights continuously. The track number and
RECORD
recording time used will be indicated on the display
start recording until the beginning of the next track.
(This can also be done during recording)
➜
- and will go out.
CD SYNC RECORD
➜
will start to flash. To resume, press PLAY on the
RECORD
CD recorder.
RECORDING
DI G
TR AC K
RE PE AT
1
TO TA L
RE M
PR O G
TI M E
RE CO RD
AB LE
L
CD
-5 0
R -4 0
-3 0
-2 0
-1 0
-6
-3
0
OV ER
REM TRACK TIME CD SYNC
RECORD
FINALIZE
ERASE
COPY
13