Speed Units; Display Units; Speed - Evinrude I-command User Manual

Table of Contents

Advertisement

Speed Units

If the speedometer is set for English display units, the speed units display
will default to miles per hour (mph). Speed displays can also be set to knots
(kn), or kilometers per hour (kph).
Changing speed units display — From the System Set-Up screen, scroll
to the Set-Up Speed display. Press ENTER. Using the UP / DOWN buttons,
select a display unit. Press ENTER to set the unit.

Display Units

Data can be displayed in English or Metric, depending on user preference.
Setting display units — From the System Set-Up screen, scroll to the
Set-Up Units screen. Press ENTER. "SET" appears in the upper right corner
of the LCD screen. Using the UP / DOWN buttons, select English or Metric.
Press ENTER to set the display. (For a list of the display units, see the "Dis-
play Units Table" on page 9.)

Speed

Boat speed is measured as speed over water, speed
over ground, or both.
Speed over water (SOW) requires a speedometer
pick-up paddle wheel. The speed is measured by cal-
culating the rate of water passing under the boat.
Speed over ground (SOG) requires a GPS antenna.
The speed is measured by calculating the movement
of the boat in relation to satellite signals.
See an authorized Dealer for accessories.
Changing Speed Measurement — To change the
speed display, scroll to the Speed screen. Press
ENTER. The Speed bar at the top of the Speed screen
appears in reverse color, and the speed measurement
is displayed. Using the UP / DOWN button, select Over Water or Over
Ground. Press and hold ENTER for three seconds to set the display. The
Main Menu appears after the speed measurement is set.
Speed Menu
21

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the I-command and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents