Alarm Screens
The following alarms require action by the operator. Check the outboard's
operator's guide to determine the cause of the alarm and any actions
required to correct the situation.
Overheat –
RPM Reduction
An
overheat
™
S.A.F.E.
mode activates. Engine
RPM will reduce, and boat speed
will slow until cooling is restored.
No Oil –
RPM Reduction
An oil delivery problem exists.
S.A.F.E. activates. Engine RPM will
reduce, and boat speed will slow
until oil delivery is restored.
Low Battery –
The battery is low. Starter motor
may not operate, and outboard
may not start.
16
condition
exists.
Overheat –
Engine Shutdown
A critical overheat condition exists.
The engine will shutdown and will
not restart until it has cooled.
No Oil –
Engine Shutdown
A prolonged oil delivery problem
exists. The engine will shutdown
and will not run for an extended
period until oil delivery is restored.
Low Oil –
Check Oil Supply
The oil tank is low. Refill the oil tank
immediately.
Need help?
Do you have a question about the I-command and is the answer not in the manual?