Installing The Sunfinder - Meade ECLIPSE VIEW 60 Instruction Manual

Installing the SunFinder:

Step 1.
The SunFinder is a pointing device that will allow you to easily locate the Sun.
Follow the below instructions to install and use the SunFinder.
STEP 1:
Remove the two viewfinder mounting thumb screws from the optical
tube.
STEP 2:
Place the SunFinder mounting bracket onto the threaded screws,
with the SunFinder pin hole pointed forward towards the front of the telescope.
STEP 3:
Use the two mounting thumb screws to secure the SunFinder
bracket onto the optical tube. Tighten to a firm feel.
Step 3.
21
20