Using The Solar Filter; Installing The Solar Filter - Meade ECLIPSE VIEW 60 Instruction Manual

Using The Solar Filter

CAUTION: NEVER look through your telescope at or near the Sun until the
solar filter is securely installed at the front of the telescope. Please read the
following instructions fully and keep them in mind when observing the Sun.
Always use caution when viewing at or near the Sun. Adult Supervision is
Step 1.
required.
Inspecting the Solar Filter:
All filters are checked carefully before shipment. However, as the solar filter
material is delicate, be sure to check for any damage prior to each use.
STEP 1:
Before installing the solar filter, hold the solar filter up to the sky
away from the Sun or use a standard 60 to 100 watt light bulb.
STEP 2:
Examine the filter for any pin holes, scratches, tears, or signs the
filter material has separated from its holder. If any damage is seen, do not use
the solar filter. Replacement will be required.
Installing the Solar Filter: The solar filter is pre-installed at our factory to
allow use right out of the box. However, if the solar filter is removed from the
19
telescope make sure to reinstall the filter before looking at or near the Sun. To
18