Advertisement
Setting the clock
1
In standby mode, press and hold
2
When the hour digits flash, turn
remote control to set the hours.
3
Press
CLOCK
again and the minute digits flash. Then turn
press
VOL+/-
on the remote control to set the minutes.
4
Press
again to confirm the time setting.
CLOCK
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM on the remote control to exit the system menu. Then press DISC
followed by "1" to exit progressive scan.
DIVX (R) VOD
QUALITY
HDMI SETUP
Tip
See chapters "Getting Started" and "System Menu Options" in the
User Manual for detailed descriptions.
on the remote control.
CLOCK
on the system or press
VOLUME-/+
SPDIF SETUP
3D PROCESSING
AUDIO SYNC
on the
VOL +/-
VOLUME-/+
on the system or
Advertisement
