Table of Contents
Advertisement
Using the Tilt, Swivel and Vertical Extension
NOTE: This is applicable for a monitor with a stand. If you purchased any other
stand, refer to the respective stand setup guide for set up instructions.
Tilt, Swivel and Vertical Extension
With the stand attached to the monitor, you can tilt the monitor for the most
comfortable viewing angle.
NOTE: The stand is detached when the monitor is shipped from the factory.
Adjusting the Rotation Display Settings of Your System
After you have rotated your monitor, you need to complete the procedure below to
adjust the Rotation Display Settings of your System.
NOTE: If you are using the monitor with a non-Dell computer, you need to go the
graphics driver website or your computer manufacturer website for information on
rotating the 'contents' on your display.
To adjust the Rotation Display Settings:
1
Right-click on the desktop and click Properties.
2
Select the Settings tab and click Advanced.
3
If you have an ATI graphics card, select the Rotation tab and set the preferred
rotation.
4
If you have an nVidia graphics card, click the nVidia tab, in the left-hand column
select NVRotate, and then select the preferred rotation.
5
If you have an Intel
Properties, select the Rotation tab, and then set the preferred rotation.
22
|
Setting Up the Monitor
graphics card, select the Intel graphics tab, click Graphic
®
Advertisement
Table of Contents
