Setting Ez News Flash - Kyocera W65K Basic Manual

Setting EZ News Flash

EZ News Flash can be used after performing a simple setting procedure
(free of charge).
Set EZ News Flash after performing "Initializing E-mail and EZweb"
(→Page 20).
1
When the standby screen is displayed,
C
press . Select the telop and press
+
[OK].
2
Select "はい"(Yes), press
(Select), and press
The setting is complete.
After you complete the settings and return to
the standby screen, you will see a telop with
the message "Next bulletin coming soon. Please
wait." run across the standby screen.
Note
● Perform the following steps to cancel the News Flash service.
When the standby screen is displayed,
) [メニュー](Menu)→select "サービス設定解除"(Undo Service Settings), a
+ [選択](Select)→select "YES", a
+ [Select]→select "OK", a
● To change the News Flash update notification tone/vibrator settings or
the incoming call lamp settings, perform the following steps.
When the standby screen is displayed,
→Set volume and time etc.
If you do not need notification of updates, set "Volume" and "Vibrator" to
"OFF".
+
[選択]
+
[Select].
+ [選択](Select)→select "解除する"(Undo), a
+ [Select] a
C →select the telop, a
+ → a 2 → a 1 → a 5 "NewsFlash Rcv" a
+ [OK]→ a
73