Charging The Battery - Kyocera W65K Basic Manual

Charging the Battery

The battery pack that comes with the phone is not fully charged when
purchased. Be sure to charge the battery pack before using the W65K
for the first time and whenever the battery level has become depleted.
Check the shape of the connector for the common AC adaptor
1
01/02 (option), and insert it straight into terminal of the
desktop holder until it clicks.
Rotate and fold out the power plug for the common AC adaptor
2
01/02 (option), and plug it into a household 100V AC power outlet.
※The common AC adaptor 02 (option) is usable for up to 240V AC.
Insert the W65K into the desktop holder until it clicks. Charging
3
begins.
The charging start signal sounds, and the charging indicator
lights red→charging
The charging end signal sounds, and the charging indicator
goes out→charging finished
When charging is completed, remove the W65K from the desktop
holder, and remove the power plug from the power outlet.
Note
● You must purchase a common AC adaptor 01/02 (option) for charging.
Note that the configuration of the AC adaptor may be different from that
shown in the illustration.
10
Removing the connector
2
Remove the common
AC adaptor 01/02
(option) by pushing
in on the lock
buttons on both
Lock buttons
sides of the
connector and
pulling it straight out
of the desktop
holder.
You can also connect the common AC adaptor 01/02
(option) to the W65K directly to charge the battery
pack.
Open the cover of the external connection jack, and
after checking the shape of the connector insert it
straight into the terminal until it clicks.
3
1